मैग्नीशियम डिसल्फराइजेशन अभिकर्मक / Magnesium Desulfurizer / Mg-based Sulfur Reducer
Magnesium desulphurization reagent (Magnesium Desulfurizer) is a chemical compound used to remove sulfur impurities through the high reactivity of magnesium. It is primarily applied in the steel-making and oil and gas refining industries. By leveraging magnesium’s strong affinity for sulfur, the reagent effectively binds to and removes sulfur compounds, thereby improving end product quality.
Welcome to send us your requirements. We supply all kinds of Magnesium Desulphurization Reagents (MG97/03, MG90/10, MG80/20, MG95/05 etc.) and Magnesium powders, with regular granular size, good flowability, highly efficient reduction of sulphur to lowest ratios in a comparatively short process time.
Physical Properties
| रूप: | Powder, granules, or pellets. |
| कण आकार: | Usually 10/80 जाल (-2mm +0.18mm). |
| गलनांक: | 650° C, क्वथनांक: 1090° C |
Grade MG97
|
Granule size |
> 1 mm – 0%, 0.2 – 1 mm – 95% मिन, < 0.2 mm – 5% अधिकतम | ||
| Weight content | Мg – 97% मिन |
Passivating additives (काओ) – 3% अधिकतम |
|
|
विज्ञापन (जी / सेमी 3) |
0.75 – 0.95 | आकार | Irregular |
|
रासायनिक रचना % |
|||
|
तत्व |
Test | तत्व | Test |
| मिलीग्राम | ≥99.90 | घन |
≤0.004 |
|
फ़े |
≤0.04 | एएल | ≤0.025 |
| और | ≤0.025 | एम.एन. |
≤0.03 |
|
में |
≤0.001 | ||
अनुप्रयोग
Magnesium desulphurization reagent is primarily used in the following areas:
Petroleum and Natural Gas Refining: To remove sulfur impurities and improve product quality.
Steel Manufacturing: For hot metal desulphurization, reducing sulfur content and enhancing steel quality.
Wet Flue Gas Desulphurization: In thermal power plants, magnesium-enhanced lime (a mixture of calcium hydroxide and magnesium hydroxide) can be used to remove sulfur dioxide from flue gases.
लाभ
High Efficiency: Magnesium has an extremely strong chemical affinity for sulfur, making it one of the most effective desulphurizers available. It can achieve very low final sulfur contents (often below 0.001% or 10 पीपीएम); 20 times faster than lime and 7 times more effective than calcium carbide.
Low Slag Production: Generates minimal slag, low iron loss.
Speed: The reaction is very fast, allowing for shorter treatment times compared to some older methods.
Cleaner Steel: Produces a cleaner steel with superior mechanical properties and better castability in continuous casting.
बहुमुखी प्रतिभा: Effective across a wide range of initial sulfur contents.
Reagent Yield: The use of cored wire or co-injection techniques ensures high utilization efficiency of the magnesium, reducing consumption and cost.
Environmental Friendliness: Recyclable after use, environmentally friendly.
Precautions
When using magnesium desulfurization reagent, it is essential to handle it with care and ensure safety. Always follow the manufacturer’s instructions and safety guidelines.
SHANXI ईस्टोन मेटल मटीरियल कं।, लिमिटेड. युनचेंग में मुख्यालय है, शांक्सी प्रांत - चीन का “मैग्नीशियम की राजधानी & अल्युमीनियम”. हम स्टील डिसल्फराइजेशन के लिए अभिकर्मकों और समाधानों के अग्रणी आपूर्तिकर्ता हैं, आतिशबाजी, ग्रिग्नार्ड प्रतिक्रियाएँ, दवा, धातुकर्म, ऑटोमोटिव, एयरोस्पेस, 3सी और विभिन्न फ़ील्ड.
हमारी कंपनी के उत्पादन और बिक्री में लगी हुई है मैग्नीशियम पाउडर, मैग्नीशियम चिप्स, मैग्नीशियम कणिकाओं, मैग्नीशियम डिसल्फराइजेशन अभिकर्मक, मैग्नीशियम मिश्र धातु कण, एल्यूमिनियम पाउडर, अल-एमजी मिश्र धातु पाउडर, वगैरह.
© कॉपीराइट 2025 ईस्टोन मेटल द्वारा सभी अधिकार सुरक्षित.
