Magnezyum desülfürizasyon reaktifi / Magnesium Desulfurizer / Mg-based Sulfur Reducer
Magnesium desulphurization reagent (Magnesium Desulfurizer) is a chemical compound used to remove sulfur impurities through the high reactivity of magnesium. It is primarily applied in the steel-making and oil and gas refining industries. By leveraging magnesium’s strong affinity for sulfur, the reagent effectively binds to and removes sulfur compounds, thereby improving end product quality.
Welcome to send us your requirements. We supply all kinds of Magnesium Desulphurization Reagents (MG97/03, MG90/10, MG80/20, MG95/05 etc.) and Magnesium powders, with regular granular size, good flowability, highly efficient reduction of sulphur to lowest ratios in a comparatively short process time.
Fiziksel Özellikler
| Biçim: | Toz, granüller, or pellets. |
| Partikül boyutu: | Genellikle 10/80 ağ (-2mm +0.18mm). |
| Erime noktası: | 650° C, Kaynama noktası: 1090° C |
Grade MG97
|
Granule size |
> 1 mm – 0%, 0.2 – 1 mm – 95% min, < 0.2 mm – 5% maksimum | ||
| Weight content | Мg – 97% min |
Passivating additives (Cao) – 3% maksimum |
|
|
Reklam (g / cm3) |
0.75 – 0.95 | Şekil | Irregular |
|
Kimyasal bileşim % |
|||
|
Eleman |
Test | Eleman | Test |
| Mg | ≥99.90 | Cu |
≤0.004 |
|
Fe |
≤0.04 | Al | ≤0.025 |
| Ve | ≤0.025 | MN |
≤0.03 |
|
İçinde |
≤0.001 | ||
Başvuru
Magnesium desulphurization reagent is primarily used in the following areas:
Petroleum and Natural Gas Refining: To remove sulfur impurities and improve product quality.
Steel Manufacturing: For hot metal desulphurization, reducing sulfur content and enhancing steel quality.
Wet Flue Gas Desulphurization: In thermal power plants, magnesium-enhanced lime (a mixture of calcium hydroxide and magnesium hydroxide) can be used to remove sulfur dioxide from flue gases.
Avantajlar
High Efficiency: Magnesium has an extremely strong chemical affinity for sulfur, making it one of the most effective desulphurizers available. It can achieve very low final sulfur contents (often below 0.001% veya 10 ppm); 20 times faster than lime and 7 times more effective than calcium carbide.
Low Slag Production: Generates minimal slag, low iron loss.
Speed: The reaction is very fast, allowing for shorter treatment times compared to some older methods.
Cleaner Steel: Produces a cleaner steel with superior mechanical properties and better castability in continuous casting.
Çok yönlülük: Effective across a wide range of initial sulfur contents.
Reagent Yield: The use of cored wire or co-injection techniques ensures high utilization efficiency of the magnesium, reducing consumption and cost.
Environmental Friendliness: Recyclable after use, environmentally friendly.
Precautions
When using magnesium desulfurization reagent, it is essential to handle it with care and ensure safety. Always follow the manufacturer’s instructions and safety guidelines.
Shanxi Eastone Metal Malzemeleri A.Ş., Ltd.. merkezi Yuncheng'dedir, Shanxi Eyaleti - Çin'in “Magnezyumun Başkenti & Alüminyum”. Çelik kükürt giderme için reaktifler ve çözümler alanında lider tedarikçiyiz, havai fişek, grinard reaksiyonları, farmasötik, metalurji, otomotiv, havacılık, 3C ve çeşitli alanlar.
Firmamız üretim ve satış yapmaktadır. Magnezyum Tozları, Magnezyum fişleri, Magnezyum Granülleri, Magnezyum Kükürt Giderme Reaktifleri, Magnezyum Alaşımı Parçacıkları, Alüminyum Tozları, Al-Mg Alaşım Tozları, vesaire.
© Telif Hakkı 2025 Eastone Metal tarafından Tüm Hakları Saklıdır.
